D-Link DMC-920R/E 10/100Base-TX to 100Base-FX Single-Fiber Media Converter (TX: 1310μm; RX: 1550)
D-Link DMC-920R/E 10/100Base-TX to 100Base-FX Single-Fiber Media Converter (TX: 1310μm; RX: 1550)
Part Number: DMC-920R/E
GDMC-920R / E - Media Converter / 10 / 100Base-TX to 100Base-FX Single-mode Fiber (20 km, SC) Dual-wavelength Media Converter.
The
DMC-920R / E media converter converts twisted-pair-to-single-mode
optical cable over one fiber interfaces for 10 / 100Base-TX and
100Base-FX Ethernet networks. The DMC-920R can simultaneously transmit
and receive signals at 1310 nm and 1550 nm over a single optical fiber
for a distance of up to 20 km.
The DMC-920R / E media converter uses 1550 nm for receiving data and 1310 nm for transmitting.
The
media converter is housed in a robust metal case and is equipped with 1
RJ-45 twisted pair port and 1 optical cable port (SC-connector) and can
be used as a standalone device or installed in the universal 16-slot
media converter chassis - DMC-1000. The media converter is hot-pluggable
when used as part of a chassis.
The
DMC-920R / E supports control functions such as LLCF (Link Loss Carry
Forward, Link Pass Through) and LLR (Link Loss Return) for the FX port.
When the DMC-920R / E is installed in the DMC-1000 chassis, its special
management module (DMC-1002) allows you to monitor the state of the
communication channel, operating mode, speed values and counters of
received and transmitted packets for both media via SNMP. This module
also allows you to set the operating mode, baud rate, enable and disable
the LLCF and LLR functions for each physical medium.
Product Datasheet