D-Link DPS-600/E 500W Single Redundant power supply unit
D-Link DPS-600/E 500W Single Redundant power supply unit
Part Number: DPS-600/E 500W
The D-Link® 500 Watt Redundant Power Supply (DPS-600) is designed to deliver the power required to guarantee that your D-Link switch (such as the DES-3828P and the DXS-3227P) and all attached Power over Ethernet (PoE) devices will remain active in the case of a single inadvertent internal power supply failure.
Failure of an internal power supply in a switch can cause network and device downtime, which translates into inefficiency. The DPS-600 provides a safety net against this problem by utilizing an integrated detection circuit to continuously monitor the switching device’s internal power supply. In the event of a power interruption or failure, the redundant power supply will immediately be triggered to supply power to the switch and any attached devices.
The deployment of the DPS-600 to an Ethernet switch does not require any changes in the configuration of your network. This device can be connected to any AC main power source from 90VAC to 264VAC and 47Hz to 63Hz through a standard three-pronged AC power cable. This 500 Watt Redundant Power Supply is also rack-mountable, enabling you to place it near the switch.
Specifications
Product Description: 500 Watt Redundant Power Supply
Output Power: 500 watts
Input Voltage Range: 85 to 264 V AC
Input Frequency: 47 to 63 Hz
Max Input Current: 10 A @ 115 V AC 5 A @ 230 V AC
Max Inrush Current: 30 A @ 115 V AC 60 A @ 230 V AC
Efficiency: 75%
Operating Temperature: 0 to 50˚ C
Storage Temperature: from -40 to 85˚ C
Operating Humidity: 10% to 90% RH
Storage Humidity: 10% to 90% RH
MTBF: 598,664 hours
Dimensions: 441 x 165 x 44 mm
Weight: 3.51 kg