D-Link DQS-5000-32S/AF L3 Managed Data center switch with 32-port 40G QSFP+ interfaces, 2 front-to-back AC PSUs & 4 front-to-back fan modules included


782,375.00 KSh 782375.0 KES 782,375.00 KSh Tax Excluded

782,375.00 KSh Tax Excluded

Contact us for this product

This combination does not exist.

D-Link DQS-5000-32S/AF L3 Managed Datacenter switch with 32-port 40G QSFP+ interfaces, 2 front-to-back AC PSUs & 4 front-to-back fan modules included

Part Number: DQS-5000-32S/AF

The D-Link 5000 Series Data Center Switches are a series of high-performance switches that feature high port density, routing, and ultra-low latency, designed to be deployed as Top-ofRack (ToR) or leaf-spine switches in data center applications. Combined with ONIE support and increased cost-efficiency, the 5000 Series form a flexible long-term solution for managing and expanding data center infrastructures in a Software-defined Networking (SDN) environment. Bare Metal and Open Networking Data Center Switches.
Open Networking
The 5000 Series switches support open networking, providing IT professionals with innovative third-party operating systems and software options. This lowers costs by separating software from hardware and increases network agility and flexibility. With support for standards-based tools and standards-based applications, open networking simplifies scalability and futureproofs the network.
As bare metal switches, the 5000 Series switches ship pre-loaded with Open Network Install Environment (ONIE). ONIE is an open source install environment that acts as an enhanced boot loader. This small Linux operating system allows administrators to install the network operating system(s) of choice as part of the data center provisioning process in the same manner that servers are provisioned. In addition, the 5000 Series also offers network administrators the option to purchase a license to activate the D-Link OS on the switches.
High Availability and Reliability
The 5000 Series switches feature a modular fan and power supply design for a high availability architecture. The hot-swappable design means that fans and power supplies can be replaced without affecting switch operation. Load sharing enables both power supplies to evenly distribute load to increase reliability and lifetime. Meanwhile, 1+1 redundancy minimizes downtime in case of a single power supply failure.
Flexibility and Versatility
The 5000 Series switches are available in a variety of high-capacity interface combinations, including SFP+, QSFP+, SFP28, and QSFP28 ports to accommodate the scale and requirements of data centers. Open Network Install Environment (ONIE) support means the switches can be easily integrated in existing network ecosystems using a variety of supported third-party Network Operating Systems (NOSs) for optimal compatibility. Furthermore, the ability to pick and choose software based on practical requirements eliminates the restrictions imposed by vendor-locked software environments.
Cost-Efficient with Dedicated Support
Compared to traditional switches, the 5000 Series offer a more cost-efficient solution through a lower initial purchasing cost combined with a reduced longterm Total Cost of Ownership (TCO). The 5000 Series switches feature front-toback and back-to-front airflow which optimizes air circulation inside the rack and facilitates the building of energy-efficient data centers by separating the hot and cold aisles. The switches also feature built-in smart fans; internal heat sensors monitor and detect temperature changes, and react accordingly by utilizing different fan speeds for different temperatures. At lower temperatures, the fans will run more slowly, reducing the switch’s power consumption and noise. 
Rich and Comprehensive D-Link OS Software
Data Center and Virtualization Features 
Data Center Bridging (DCB) is an essential set of enhancements to Ethernet for networking in data center environments. The D-Link OS for the 5000 Series switches supports several core components of Data Center Bridging (DCB) such as IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.1Qau, and VXLAN. IEEE 802.1Qbb (Priority-based Flow Control) provides flow control on specific priority levels to ensure there is no data loss during network congestion. IEEE 802.1Qaz (Enhanced Transmission Selection) manages the allocation of bandwidth amongst different traffic classes. IEEE 802.1Qau (Congestion Notification) provides congestion management for data flows within network domains to avoid congestion. Meanwhile, VXLAN allows network administrators to deploy larger and more flexible VLAN architectures. Using a 24 bit ID, VXLAN greatly increases the number of simultaneous VLANs. Compared to the 4096 limit of traditional VLAN protocols, VXLAN enables the deployment of up to 16 million isolated logical networks across Layer 3 subnets, to accommodate the increasing scale of virtualized cloud environments.
Complete Layer 2/3 Functionality
The 5000 Series switches feature a complete L2 and L3 feature set to meet the demands of data center applications. Layer 2 features include L2 switching, L2 multicast, advanced Quality of Service (QoS), and robust security features. Meanwhile, the 5000 Series offers advanced L3 routing for enterprise integration, including OSPF, BGP, Graceful Restart, Bidirectional Forwarding Detection (BFD), and L3 multicast.


General Features: 
   Device Type  :  Switch - 32 ports
   Enclosure Type :  Rack-mountable 1U
   Subtype :  40 Gigabit Ethernet
   Ports :  32 x 40 Gigabit QSFP+
   Performance :  Switching capacity: 2.56Tbps ¦ Forwarding rate: 1428 Mpps
   MAC Address Table Size :  288K entries
   Remote Management  :  SNMP, Telnet, CLI
   Features :  Front to back airflow, reset button, 12MB packet buffer, 4     fans, Top-of-Rack (ToR)
   Processor :  X Intel: 2.4 GHz
   Status Indicators :  Status
Expansion / Connectivity
    Interfaces :  32 x 40G QSFP+  ¦ 1 x USB 2.0 
   Power Device :  Internal power supply - hot-plug
   Installed Qty :  2 (installed) / 2 (max)
   Power Redundancy :  Yes
   Power Redundancy Scheme :  1+1
   Power Provided :  550 Watt
   Voltage Required :  AC 120/230 V (50/60 Hz)
   Power Consumption 
   Operational :  406 Watt
   MTBF :  85,937 hours
   Compliant Standards :  BSMI, CB, CCC, FCC, cULus

Product Datasheet