D-Link DAP-F3711-I 866 Mbps 802.11a/n/ac ( 5GHz) Outdoor Bridge /AP/CPE
Stable outdoor wireless signal coverage and long-distance wireless backhaul.
- Support 802.11ac standard with 2x2 MIMO technology
- Transmission distance 0~5Km. Max
- Wireless speed up to 867Mbps
- Support multiple operation modes: AP, Station, WDS AP, WDS Station
- Support point-to-point, point-to-multipoint connection
- Unique RF and antenna design enable long-range transmission
- Wireless multimedia optimization technology guarantees the stability of video and traffic transmission
- Support dual backup firmware
- Web based working scenario selection makes the installation and setting much easier
- Support remote configuration and upgrade management by AC
- Support SNMP
- IP66 complied
Specifications
| CPU-Baseband Radio | QCA9557+QCA9882 |
|---|---|
| Memory | 128MB DDR2 |
| Flash | 16MB |
| Interfaces | 2* 10/100 Mbps Ethernet Port (LAN / PoE); Reset button |
| Power Requirement | 24VDC/0.5A Passive PoE Adapter |
| Antenna Gain | 15dBi |
| Beamwidth | H:400, V:150 |
| Protection | 8KV ESD Protection; 4KV Lightening Protection |
| Enclosure | ABS; IP66 complied |
| Wireless Standard | IEEE 802.11 a/n/ac |
| Operating Frequency | 5.180 ~ 5.320Ghz; 5.745 ~ 5.825Ghz |
| Maximum transmit Power | 27dBm |
| Wireless Speed | Up to 867 Mbps |
| Wireless Security | WPA-PSK, WPA2-PSK, 802.1x, IP -MAC Filtering |
| Network Mode | Bridge, Router |
| Operation Mode | Bridge: Access Point, Station, WDS Access Point, WDS Station |
| Firmware upgrade | Web-based upgrade; Remote AC central upgrade |
| Weight | 0.6kg |
| Dimensions | 288×88×45mm |
| Environment | Operating temperature: -40°C ~ 65°C; Storage temperature: -40°C ~ 85°C; Operating Humidity: 5% ~ 95% RH non-condensing |
| Max Power consumption | <= 15W |
| Mounting Kit | Pole Mounting Kit |
Part Number: DAP-F3711-I
Our newest products
Check out what's new in our inventory !
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provide both a filter and a template to use.
