D-Link DAP-1665/MNA Wireless AC Wave2 1200 Dual Band (11a/b/g/n/ac) Access Point
D-Link DAP-1665/MNA Wireless AC Wave2 1200 Dual Band (11a/b/g/n/ac) Access Point
Part Number: DAP-1665/MNA
The DAP-1665 AC1200 Wi-Fi Range Extender/Access Point is a fast and versatile solution for bringing wireless AC to your existing wired network, or extending your current wireless network. The latest 802.11ac Wave 2 technology featuring beamforming and MU-MIMO delivers combined speeds of up to 1200 Mbps, so you can create a high-speed wireless link between networks, or quickly transfer large files wirelessly between computers on the same network.
The DAP-1665 features the latest 802.11ac wireless technology, capable of delivering combined speeds of up to 1200 Mbps over two bands. Use the 2.4 GHz band’s 300 Mbps for web surfing, email and chat, while simultaneously using the lower-interference 5 GHz band for network bridging, downloading, and file transfers. For wired connections, the Gigabit LAN port enables wired data speeds of up to 1000 Mbps, meaning that your Gigabit-compatible wired devices can also benefit from the high speeds of wireless AC.
The DAP-1665 can be configured to operate in several modes, allowing you to customize it to your networking needs. Access Point mode allows the device to act as a central hub for wireless users, giving them access to your existing wired network. Wireless Client mode is available to enable the DAP-1665 to connect to another access point and provide network and Internet access to a remote wired device such as a gaming console or media center. Bridge mode allows you to create a high-speed wireless link between two wired networks (LANs), alleviating the need to install additional network cabling. Bridge mode with AP adds the functionality of a wireless access point to your bridged network, so wireless clients can access resources on both networks. Repeater mode extends wireless coverage of your existing wireless network to cover “dead” spots and reach farther into your home or office. Lastly, WISP Repeater and Client modes support users that are subscribed to Internet Service Providers (ISPs) that provide this type of equipment to connect to their wireless broadband connection
SPECIFICATIONS
Networking Standards
• IEEE 802.11ac
• IEEE 802.11n
• IEEE 802.11g
• IEEE 802.11b
• IEEE 802.11a
• 802.3/802.3u
Interface
• Draft IEEE 802.11ac wireless LAN
• IEEE 802.11n/g/b/a wireless LAN
• 10/100/1000BASE-TX wired LAN
Operating Modes
• Access Point (AP) • Bridge • Bridge with AP
• Wireless Client • Repeater
Operating Frequency
• 5 GHz Band: • 5.15 GHz to 5.35 GHz • 5.47 GHz to 5.85 GHz
• 2.4 GHz Band: • 2.4 - 2.4835 GHz
Antenna
• 2 x 2 dBi external antennas
LEDs
• Power
• 2.4 GHz wireless
• 5 GHz wireless
• LAN
Advanced Features
Security
• 64/128-bit WEP
• WPA-PSK/WPA2-PSK
• Wi-Fi Protected Setup (WPS)
• MAC address filtering
• Kensington® security slot
• SSID broadcast disable
Device Management
• Web-based interface minimum requirements:
• Internet Explorer 7, Firefox 12.0, Chrome 20.0, or Safari 4.0
Physical
Dimensions
• 147 x 108 x 27.8 mm (5.79 x 4.25 x 1.1 inches)
Weight
• 222 grams (0.489 lbs)
Power
• Input: 12 V/1 A
• Consumption: Maximum 5.18 W
Temperature
• Operating: 0 to 40 °C (32 to 104 °F)
• Storage: -20 to 65 °C (-4 to 149 °F)
Humidity
• Operating: 10% to 90% non-condensing
• Storage: 5% to 95% non-condensing
Certifications
• CE • FCC • TELEC
• IC • Wi-Fi Certified • VCCI