D-Link DAP-2682/UDL Wireless 2300Mbps Managed 11AC Wave2 4x4 MU-MIMO Dual Band Access point
D-Link DAP-2682/UDL Wireless 2300Mbps Managed 11AC Wave2 4x4 MU-MIMO Dual Band Access point
Part Number: DAP-2682/UDL
Indoor - Wall/Ceiling
- Easy to manage with D-Link’s free centralized management software-based solution Nuclias Connect
- Superior throughput with dual-band transfer speeds up to 600 Mbps in the 2.4 GHz band and 1700 Mbps in the 5 GHz band
- Band Steering makes sure connected devices get the best available and supported frequency band
- Supports Power over Ethernet (802.3at) for simpler installation with less cable clutter
- Simple, soft-edge design, ideal for subtle visibility when wall or ceiling mounted (mounting hardware included)
- Supports multiple VLANs for enhanced network management and up to 16 SSID setups
- Supports WPA2™ - WiFi security for more protection
- 2 x Gigabit LAN port for high-capacity backhaul to the wired network
- Supports multiple AP modes to ensure performance optimization based on your network’s needs
- MAC Address Filtering and WLAN Partitioning ensure ultimate control of your network’s access
- Captive Portal with industry-standard authentication for enhanced access management
- Works as a standalone AP or as part of a centralized, scalable multi-device deployment
Specifications
Dimensions 190 x 190 x 43.7 mm Environment Indoor 2.4GHz Speed 600 Mbps 5GHz Speed 1700 Mbps MU-MIMO and Tx beamforming Yes Maximum Output Power 2.4 GHz :28 dBm / 5 GHz : 28 dBm Interface Two 10/100 /1000 Ethernet port (PoE Supported) Mounting Wall/Ceiling PoE Mode 802.3at
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.