The DGS-1510 Series is D-Link’s latest generation of SmartPro switches
with 10G port connectivity, making them ideal for deployment in SME/SMB
aggregation environments. The DGS-1510 Series provides a reliable and
scalable interconnection between core switches and edge switches.
Available in 16, 24, or 48 10/100/1000 Mbps port models with additional
fiber ports for physical stacking and/or uplinks, the DGS-1510 Series
are perfect for any business network environment.
The DGS-1510 Series PoE-enabled switches are ideal for businesses
looking to power VoIP phones, wireless access points, or network
cameras. Both the DGS-1510-28P, DGS-1510-28XMP and DGS-1510-52XMP
support up to 30W of power output, giving you flexible power allocation
for a variety of powered devices. This enables you to scale your
operations to meet business growth and incorporate new technologies all
with affordable installation costs.
10G SFP+ Stacking/Uplink Ports
Depending on whether linear or fault-tolerant ring stacking is
implemented, users can use one or two 10-Gigabit SFP+ ports to create a
physical stack. 6 units or 288 gigabit ports can be configured as a
stack using optional direct attach cables to provide high bandwidth with
cost efficiency. Users can also easily configure and manage any of the
DGS-1510 SmartPro series in a single stack. With 20 Gbps full duplex
capabilities, the DGS-1510 offers 10G connectivity to core networks and
servers while still maintaining fast data transfer rates.
Layer 3 Traffic Management
The DGS-1510 Series provides static routing, allowing you to segment
your network into workgroups and communicate across VLANs without
degrading application performance. With these capabilities, you can
boost the efficiency of your network by offloading internal
traffic-handling tasks from your router, allowing it to manage external
traffic and security.
Extensive Layer 2 Features
The DGS-1510 Series switches are equipped with a complete lineup of
Layer 2 features, including IGMP Snooping, Port Mirroring, Spanning
Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow
Control function allows servers to directly connect to the switch for
fast, reliable data transfer. Network maintenance features include
Loopback Detection and Cable Diagnostics; Loopback Detection is used to
detect loops created by a specific port or VLAN and will automatically
shut down the affected port or VLAN. The Cable Diagnostics feature,
designed primarily for administrators and customer service
representatives, can determine cable quality and can quickly discover
sections of cabling that need to be replaced.
Traffic Classification & QoS
The DGS-1510 Series supports Auto Surveillance VLAN (ASV) and Auto
Voice VLAN, which are best suited for VoIP and video surveillance
deployments. Auto Surveillance VLAN is a new, industry-leading
technology built into D-Link Smart Switches. This technology
consolidates data and surveillance video transmission through a single
SmartPro switch, sparing businesses the expense of maintaining expensive
dedicated hardware and facilities. ASV also ensures the quality of
real-time video for monitoring and control without compromising the
transmission of conventional network data. The Auto Voice VLAN
technology enhances VoIP service by automatically placing voice traffic
from an IP phone to an assigned VLAN. With higher priority and an
individual VLAN, these features guarantee the quality and security of
VoIP traffic. Furthermore, the DSCP markings on Ethernet packets enable
different levels of service to be assigned to network traffic. As a
result, these voice and video packets take precedence over other packets
ensuring uninterrupted VoIP for network users.
Keep Your Network Secure
D-Link’s innovative Safeguard Engine protects DGS-1510 Series against
traffic flooding caused by malicious attacks. The series also supports
802.1X portbased authentication, allowing the network to be
authenticated through external RADIUS servers.
The DGS-1510 Series supports both MAC and Web-based access control.
These provide a user-friendly way to alleviate deployment time, giving
customers an effective and efficient authentication choice.
With an Access Control List (ACL), the DGS-1510 Series both enhances
network security and helps to protect the internal IT network by
screening ingress traffic based on any user defined content. The
DGS-1510 Series includes ARP Spoofing Prevention, which protects from
attacks on the Ethernet network that may allow an intruder to sniff data
frames, modify traffic, or bring traffic to a halt altogether by
sending fake ARP messages to the network. For added security, the DHCP
Server Screening feature screens rogue DHCP server packets from user
ports to prevent unauthorized IP assignment.
IPv6 Ready
The DGS-1510 Series is IPv6 ready and supports various IPv6 functions
such as MLD Snooping, IPv6 ACL/QoS, and IP-MAC-Port Binding (IMPB) to
ensure seamless integration of next generation networks. The DGS-1510
Series also supports an IPv4/v6 dual stack function that allows the
switch to act as a bridge between IPv4 and IPv6 networks.
Versatile Management
The DGS-1510 Series supports virtual stacking via D-Link’s Single IP
Management (SIM), allowing up to 32 devices to be managed via a single
IP address. This simplifies management of small workgroups or wiring
closets while reducing the number of IP addresses needed in your
network.
The DGS-1510 Series provides a D-Link Network Assistant Utility and a
web-based management interface that enables administrators to easily set
up and remotely manage their networks. The D-Link Network Assistant
Utility allows customers to easily discover and perform initial setup on
multiple D-Link products simultaneously. This greatly reduces the
deployment time for services required by network administrators such as
device firmware upgrades, configuration backup and restoration, setting
IP addresses, or even solution deployment like ASV.
The DGS-1510 Series also supports fully featured Command Line
Interface (CLI) and SNMP MIBs. It provides the capability of central
management in a large scale network. CLI management of the switches is
also available via a console port. With out-of-band manageability,
accessing the switch is still possible even if its network data plane is
overwhelmed by bulk or malicious traffic.
Energy Efficient
DGS-1510 switches are capable of conserving power without sacrificing
operational performance or functionality by using D-Link Green 3.0
technology. Using the 802.3az Energy Efficient Ethernet standard, the
network will automatically decrease power usage when traffic is low. For
environments not fully supporting the standard, DGS-1510 switches offer
advanced power saving settings including port shutoff, LED shutoff, and
system hibernation based on custom scheduling profiles. The profiles
can also be applied to the PoE switch so that there is no unnecessary
power consumption during off hours.
Port Standards & Functions
IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet,
IEEE 802.3ab 1000BASE-T Gigabit Ethernet, 802.3ae 10 GbE, IEEE 802.3x
Flow Control for Full-Duplex Mode, Auto-negotiation
Number of Ports
48 10/100/1000 Mbps PoE capable, 4 10G SFP+
Network Cables
UTP Cat. 5, Cat. 5e (100 m max.); EIA/TIA-568 100-ohm STP (100 m max.)
Full/Half Duplex
Full/half duplex for 10/100 Mbps and Gigabit speed
Media Interface Exchange
Auto or configurable MDI/MDIX
Performance
Switching Capacity
176 Gbps
Transmission Method
Store-and-forward
MAC Address Table
Up to 16,000 entries per device
MAC Address Update
Up to 512 static MAC entries, enable/disable auto-learning of MAC addresses
Maximum 64 bytes Packet Forwarding Rate
130.95 Mpps
Packet Buffer Memory
3 MB per device
MTBF
244,237 hours
PoE
PoE Standard
IEEE 802.3af, 802.3at
PoE Capable Ports
Ports 1 to 48: Up to 30 W
PoE Power Budget
Max. 740 W
Fiziksel Özellikler
Software Features
Stackability
• Virtual Stacking Support
• D-Link Single IP Management
• Up to 32 devices per virtual stack
• Up to 20G stacking bandwidth
• Physical Stacking
• Supports Duplex Chain/Ring topology
• Up to 40G stacking bandwidth full duplex
• Up to 6 units per stack
L2 Features
• MAC Address Table: 16K
• Flow Control
• 802.3x Flow Control
• HOL Blocking Prevention
• Jumbo Frame up to 9000 Bytes
• IGMP Snooping
• IGMP v1/v2/v3 Snooping
• IGMP v3 awareness
• Supports 512 IGMP groups
• Supports 128 static multicast addresses
• IGMP per VLAN
• Supports IGMP Snooping Querier
• Host-based IGMP Snooping Fast Leave
• MLD Snooping
• Supports MLD v1/v2 awareness
• Supports 512 groups
• Supports 128 Static Multicast Addresses
• Per VLAN MLD Snooping
• Host-based MLD Fast Leave
• MLD Snooping Querier
• Spanning Tree Protocol
• 802.1D STP
• 802.1w RSTP
• 802.1s MSTP
• Loopback Detection
• 802.3ad Link Aggregation
• Max. 32 groups per device/8 ports per group
• Port Mirroring
• Support 4 mirroring groups
• One-to-One, Many-to-One
• Supports Mirroring for Tx/Rx/Both
• Multicast Filtering
• Forwards all unregistered groups
• Filters all unregistered groups
• LLDP, LLDP-MED
VLAN
• 802.1Q Tagged VLAN
• 4K VLAN Groups
• Configurable VID: 0~4094
• MAC-based VLAN
• Asymmetric VLAN
• ISM VLAN
• Auto Voice VLAN
• Auto Surveillance VLAN
Quality of Service (QoS)
• 802.1p Quality of Service
• Queue Handling
• Strict
• Weighted Round Robin (WRR)
• 8 queues per port
• Bandwidth Control
• Port-based (Ingress/Egress, min. granularity for 10/100/1000 BASE-T ports is 64 Kb/s)
• CoS based on
• 802.1p priority
• VLAN
• MAC address
• Ether type
• IP address
• DSCP
• Protocol type
• TCP/UDP port number
• DSCP of IPv6 Traffic Class
• IPv6 flow label
L3 Features
• ARP
• 256 Static ARP
• Supports Gratuitous ARP
• IPv6 Neighbour Discovery (ND)
• Default Routing
• Static Routing
• 64 IPv4 Static Route Entries
• 32 IPv6 Static Route Entries
Access Control List (ACL)
• ACL based on
• 802.1p priority
• VLAN
• MAC address
• Ether type
• IP address
• DSCP
• Protocol type
• TCP/UDP port number
• DSCP of IPv6 Traffic Class
• IPv6 flow label
• ACL Actions
• Permit
• Deny
• Max. 256 access list
• Max. 768 rules
• Single or multiple ports (each rule)
• Time-based ACL
• ACL Statistics
Security
• Port Security
• Supports up to 128 MAC addresses per port
• Broadcast/Multicast/Unicast Storm Control
• Dynamic ARP Inspection
• Static MAC
• D-Link Safeguard Engine
• DHCP Server Screening
• ARP Spoofing Prevention
• Max. 64 entries
• SSH
• Supports v2
• Supports IPv4/IPv6
• SSL
• Supports v1/v2/v3
• Supports IPv4/IPv6
• Traffic Segmentation
• IP-MAC-Port Binding
• DHCP snooping
• IP Source Guard
• Dynamic ARP inspection
• DHCPv6 Guard
• RA Guard
• IPv6 Snooping
• IPv6 Source Guard
• DoS Attack Prevention
AAA
• Compound Authentication
• 802.1X Port and MAC-based Authentication
• Supports RADIUS and Local Server
• Supports EAP, OTP, TLS, TTLS, PEAP
• Web-based Access Control (WAC)
• Port-based Access Control
• Host-based Access Control
• Dynamic VLAN Assignment
• MAC-based Access Control (MAC)
• Port-based Access Control
• Host-based Access Control
• Dynamic VLAN Assignment
• Japan Web-based Access Control (JWAC)
• Port-based Access Control
• Host-based Access Control
• Dynamic VLAN Assignment
OAM
• Cable Diagnostics
• Factory Reset
Management
• CLI
• Telnet Server
• TFTP Client
• IPv6 Neighbor Discovery
• Configurable MDI/MDIX
• SNMP
• Supports v1, v2c, v3
• SNMP Trap
• System Log
• Max. 10,000 log entries
• DHCP Client
• DHCP option 82
• DHCP relay
• D-Link Network Assistant support
• SNTP
• Dual images
• Dual Configurations
• ICMPv6
• IPv4/v6 Dual Stack
• DHCP Auto Configuration
• RMON v1
• Secured FTP (SFTP) Client
D-Link Green 3.0 Technology
• Power Saving by:
• Link Status
• LED or Port Shutoff
• System Hibernation mode
• Time-based PoE (PoE model only)
